60VOLT 30AH LITHIUM ION BATTERY – insalithiumpower.in

60VOLT 30AH LITHIUM ION BATTERY

Original price was: ₹16,200.00.Current price is: ₹13,500.00.


  • Battery Type: Lithium-ion (Li-ion)

  • Voltage: 60 Volt

  • Capacity: 30 Ah

  • Use Case: Replace existing 48–51 V battery in electric scooter

  • Approximate Size Provided:
    Length > 17 cm, Width > 16 cm, Height > 24 cm


πŸ“Œ Important Specs for a 60 V 30 Ah Li-ion Battery

Spec Item Typical Value / What It Means
Nominal Voltage 60 V β€” Higher than your original 48–51 V battery.
Capacity 30 Ah β€” Determines how long your scooter runs per charge.
Energy (Watt-hrs) 60 V Γ— 30 Ah = 1800 Wh β€” Higher energy means more range.
Chemistry Li-ion (e.g., 18650 or 21700 cells) β€” lighter & longer life than lead acid.
Continuous Discharge Current Should support motor draw β€” usually 30–60 A+ for scooters.
Peak Discharge Current 60–100 A+ depending on motor size.
Cycle Life 800–1500 cycles typical for good quality Li-ion.
BMS (Battery Management System) Must include: over-charge, over-discharge, short-circuit, temperature protection.

πŸ“ About Your Size Requirement

You specified:
L > 17 cm, W > 16 cm, H > 24 cm

That’s reasonable for a 60 V 30 Ah pack, but actual size will vary depending on:

  • Cell type (21700 cells pack is more compact than 18650)

  • Case design

  • BMS and wiring space

Most 60 V 30 Ah packs are roughly in that ballpark, but always confirm exact dimensions before buying.


πŸ”Œ Compatibility Notes

Voltage Step-Up/Down:

  • Your scooter is originally designed for ~48–51 V.

  • Fitting a 60 V battery increases voltage, which can:

    • Increase motor speed

    • Increase stress on controller & motor

    • Potentially require a controller that supports 60 V systems

Controller Check:

  • Ensure your scooter’s controller supports 60 V input. If not:

    • You may need to upgrade the controller

    • Or use a voltage regulator (not ideal for motor systems)


⚑ Safe Charging & BMS

A proper Li-ion battery must have a BMS that:
βœ” Balances cells
βœ” Protects against over-charge & over-discharge
βœ” Prevents over-current & short circuit
βœ” Monitors temperature

Charger requirements:

  • Must match 60 V nominal battery

  • Voltage cutoff around 67.2–67.8 V (for 60 V Li-ion)

  • Proper current β€” typically 6 A to 10 A for a 30 Ah pack


🧰 What to Tell a Supplier/Builder

When ordering or building a custom pack, give them:

  1. Voltage: 60 V

  2. Capacity: 30 Ah

  3. Max Continuous Discharge: β‰₯ 10–40 A

  4. Peak Discharge: β‰₯ 50–100 A

  5. Physical Size Constraint:

    • L > 17 cm

    • W > 16 cm

    • H > 24 cm

  6. Required Connector Type: (e.g., XT60 / Anderson / bolt tabs)

  7. BMS Requirements: cell balancing + protections + temp sensors

  8. Charger: 60 V Li-ion charger (specify current)


πŸ“Œ Quick Checklist Before Installation

βœ” Battery fits inside your scooter battery compartment
βœ” Battery voltage is compatible with controller
βœ” Battery has quality BMS
βœ” Correct charger available
βœ” Proper mounting & insulation for safety

Reviews

There are no reviews yet.

Be the first to review “60VOLT 30AH LITHIUM ION BATTERY”

Your email address will not be published. Required fields are marked *