π Call +91-8047665106


60VOLT 30AH LITHIUM ION BATTERY
Original price was: ₹16,200.00.₹13,500.00Current price is: ₹13,500.00.
-
Battery Type: Lithium-ion (Li-ion)
-
Voltage: 60 Volt
-
Capacity: 30 Ah
-
Use Case: Replace existing 48β51 V battery in electric scooter
-
Approximate Size Provided:
Length > 17 cm, Width > 16 cm, Height > 24 cm
π Important Specs for a 60 V 30 Ah Li-ion Battery
| Spec Item | Typical Value / What It Means |
|---|---|
| Nominal Voltage | 60 V β Higher than your original 48β51 V battery. |
| Capacity | 30 Ah β Determines how long your scooter runs per charge. |
| Energy (Watt-hrs) | 60 V Γ 30 Ah = 1800 Wh β Higher energy means more range. |
| Chemistry | Li-ion (e.g., 18650 or 21700 cells) β lighter & longer life than lead acid. |
| Continuous Discharge Current | Should support motor draw β usually 30β60 A+ for scooters. |
| Peak Discharge Current | 60β100 A+ depending on motor size. |
| Cycle Life | 800β1500 cycles typical for good quality Li-ion. |
| BMS (Battery Management System) | Must include: over-charge, over-discharge, short-circuit, temperature protection. |
π About Your Size Requirement
You specified:
L > 17 cm, W > 16 cm, H > 24 cm
Thatβs reasonable for a 60 V 30 Ah pack, but actual size will vary depending on:
-
Cell type (21700 cells pack is more compact than 18650)
-
Case design
-
BMS and wiring space
Most 60 V 30 Ah packs are roughly in that ballpark, but always confirm exact dimensions before buying.
π Compatibility Notes
Voltage Step-Up/Down:
-
Your scooter is originally designed for ~48β51 V.
-
Fitting a 60 V battery increases voltage, which can:
-
Increase motor speed
-
Increase stress on controller & motor
-
Potentially require a controller that supports 60 V systems
-
Controller Check:
-
Ensure your scooterβs controller supports 60 V input. If not:
-
You may need to upgrade the controller
-
Or use a voltage regulator (not ideal for motor systems)
-
β‘ Safe Charging & BMS
A proper Li-ion battery must have a BMS that:
β Balances cells
β Protects against over-charge & over-discharge
β Prevents over-current & short circuit
β Monitors temperature
Charger requirements:
-
Must match 60 V nominal battery
-
Voltage cutoff around 67.2β67.8 V (for 60 V Li-ion)
-
Proper current β typically 6 A to 10 A for a 30 Ah pack
π§° What to Tell a Supplier/Builder
When ordering or building a custom pack, give them:
-
Voltage: 60 V
-
Capacity: 30 Ah
-
Max Continuous Discharge: β₯ 10β40 A
-
Peak Discharge: β₯ 50β100 A
-
Physical Size Constraint:
-
L > 17 cm
-
W > 16 cm
-
H > 24 cm
-
-
Required Connector Type: (e.g., XT60 / Anderson / bolt tabs)
-
BMS Requirements: cell balancing + protections + temp sensors
-
Charger: 60 V Li-ion charger (specify current)
π Quick Checklist Before Installation
β Battery fits inside your scooter battery compartment
β Battery voltage is compatible with controller
β Battery has quality BMS
β Correct charger available
β Proper mounting & insulation for safety







Reviews
There are no reviews yet.